Materials And Tools Needed For Garment Printing

It is necessary to make sure that certain materials are needed when making a sample of the garment, and to understand the functions of various materials in order to lay a good foundation for making high-quality templates.

This article will introduce the tools and materials needed for making templates.

The garment pattern is based on the structural drawing. It is the important basis for cutting, drawing, cutting, and checking the cutting process.

The difference between the garment pattern and the structural drawing is that the outline of the garment piece is drawn according to the specifications of the product, and the outline of the garment piece is a net suture, called the "net sample".

The garment pattern is formed according to the contour line of the net sample and the addition of some seams and welt edges.

The production of garment pattern is a means to suit garment production and guarantee the quality of garment.

The basic requirements for making model materials are flexibility, toughness and surface finish.

The materials used for garment pattern are generally as follows:

1. big white paper.

It's just a pitional paper, not a formal model material.

2. kraft paper.

It is advisable to use 100~130 g / m2 specifications.

Kraft paper is thin, good toughness, low cost, easy to cut, but hard enough.

Suitable for the production of small batch garment production model.

3. mounting cardboard.

250 grams / square meter should be chosen.

Cardboard paper is clean.

Moderate thickness and good toughness.

It is suitable for making garment samples in medium batch garment production.

4. yellow board.

It is advisable to use 400~500 g / m2 specifications.

Yellow board is thicker, harder and harder to wear.

It is suitable for making garment samples for mass production of garments.

5. abrasive cloth.

Material that is not easy to slide.

6. thin sheet of white iron or copper.

Process template materials that can be used for a long time.